Third Wave’s X2110 Server and FreeBSD

別にドスパラ/サードウェーブの宣伝をするわけではないですが、 THIRDWAVE SERVER X2110 に FreeBSD 12-Release をインストールして数ヶ月になります。

とりあえず問題なく動いていますのでdmesg晒しておきます。 悪いことには使わないでね。

この子はBMC(っていうの?Ethernetの口がついてて多分そこから電源on/offとか できるやつ)がついてて、COM1はどうやらBMC側に向いているみたい。 だからシリアルコンソールにboot message流そうとして随分頑張ったけど gettyが起きてこなくてだめだった。 COM2を使えば行けるはずなんだけどなぁ。 なので、電源投入時にシングルユーザモードに入る、みたいなことができません。 誰かやり方知ってたらぜひご教示を!

—<<BOOT>>—
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p9 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 800x600
CPU: Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz (3792.18-MHz K8-class CPU)
Origin=”GenuineIntel” Id=0x906e9 Family=0x6 Model=0x9e Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Structured Extended Features3=0xc000000<IBPB,STIBP>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66789703680 (63695 MB)
Event timer “LAPIC” quality 600
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
Security policy loaded: MAC/ntpd (mac_ntpd)
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 1 3 2 4 5 6 7
Timecounter “TSC-low” frequency 1896092174 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: “Intel Secure Key RNG”
kbd0 at kbdmux0
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter “HPET” frequency 24000000 Hz quality 950
Event timer “HPET” frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn’t map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer “RTC” frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter “i8254” frequency 1193182 Hz quality 0
Event timer “i8254” frequency 1193182 Hz quality 100
Timecounter “ACPI-fast” frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf300000-0xdf30ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdf310000-0xdf311fff,0xdf31e000-0xdf31e0ff,0xdf31d000-0xdf31d7ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci1: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff at device 0.0 on pci2
vgapci0: Boot video device
pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff at device 0.0 on pci3
igb0: attach_pre capping queues at 4
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 4
igb0: pxm cpus: 4 queue msgs: 4 admincnt: 1
igb0: using 4 rx queues 4 tx queues
igb0: Using MSIX interrupts with 5 vectors
igb0: allocated for 4 tx_queues
igb0: allocated for 4 rx_queues
igb0: Ethernet address: e0:d5:5e:19:14:39
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci4: <ACPI PCI bus> on pcib5
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xdf100000-0xdf17ffff,0xdf180000-0xdf183fff at device 0.0 on pci4
igb1: attach_pre capping queues at 4
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 4
igb1: pxm cpus: 4 queue msgs: 4 admincnt: 1
igb1: using 4 rx queues 4 tx queues
igb1: Using MSIX interrupts with 5 vectors
igb1: allocated for 4 tx_queues
igb1: allocated for 4 rx_queues
igb1: Ethernet address: e0:d5:5e:19:14:3a
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST12000NM0007-2A1101 SN02> ACS-3 ATA SATA 3.x device
ada0: Serial Number ZJV49EF1
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 11444224MB (23437770752 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST12000NM0007-2A1101 SN02> ACS-3 ATA SATA 3.x device
ada1: Serial Number ZJV48MJ6
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 11444224MB (23437770752 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST12000NM0007-2A1101 SN02> ACS-3 ATA SATA 3.x device
ada2: Serial Number ZCH08J0P
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 11444224MB (23437770752 512 byte sectors)
uhub0: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <ST12000NM0007-2A1101 SN02> ACS-3 ATA SATA 3.x device
ada3: Serial Number ZJV452KA
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 11444224MB (23437770752 512 byte sectors)
22 ports with 22 removable, self powered
ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
ada4: <SATADOM-SL 3ME4 L17725> ACS-3 ATA SATA 3.x device
ada4: Serial Number BCA11807130040049
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada4: Command Queueing enabled
ada4: 61057MB (125045424 512 byte sectors)
ada5 at ahcich5 bus 0 scbus5 target 0 lun 0
ada5: <SATADOM-SL 3ME4 L17725> ACS-3 ATA SATA 3.x device
ada5: Serial Number BCA11807130040050
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada5: Command Queueing enabled
ada5: 61057MB (125045424 512 byte sectors)
ugen0.2: <no manufacturer Gadget USB HUB> at usbus0
uhub1 on uhub0
uhub1: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/ada4p2 [rw]…

(2019/Aug)